- Видео 94
- Просмотров 1 524 733
Bespoke Model Maker
Австралия
Добавлен 18 авг 2006
My goal here is to turn basic models into visual pieces of art via the addition of lighting, motors and audio. I don't have any set plans when I start a model, I'm continually making adjustments and realising new ways of bringing models to life, whilst always keeping the additions as cheap as possible.
V-22 Osprey -Completed 1/48 scale model with night lighting and glowing blades
Short video of my finished Italeri 1/48 scale V-22 Osprey showing the night lights and glowing rotor tips. Full 6 minute video of full operation and build pics can be found here.
ruclips.net/video/dxnx8r-Dpqk/видео.html
ruclips.net/video/dxnx8r-Dpqk/видео.html
Просмотров: 251
Видео
V-22 Osprey Italeri 1/48 Model Build - Nav lights, motors, rotor tip lighting - Completed
Просмотров 1,6 тыс.5 месяцев назад
Finished videos and photos of my Osprey build. Added navigation and strobe lighting, motors, mini MP3 audio, and rotor tip lighting. Lighting installation was pretty straight forward. Motor installation was difficult with three subsequent motor failures, which required disassembly, repair and reassembly. Not pretty. I decided to add a power cart to this diorama as it was going to hide the wirin...
V-22 Osprey 1/48 Italeri Build Update - Progress
Просмотров 3156 месяцев назад
All the wiring has been connected up. The model has been through the paint shop. I’ve added a simple integrated mini mp3 audio board to diorama base. Test run to prove all is working with no smoke. Next step, weathering and finishing the base.
ITALERI V-22 OSPREY - Adding Lights and Motors - Progress
Просмотров 6156 месяцев назад
Progress video showing installation of lights and motors to the ITALERI 1:48 scale V-22 Osprey model.
Meng AH-64D Apache Longbow Helicopter model with lighting - Completed
Просмотров 6986 месяцев назад
Meng Apache with lighting - MFDs, Navigation and Strobe lighting.
Meng 1/35 Boeing AH-64D Apache Longbow with Strobes / MFDs and Nav lights - Completed
Просмотров 8026 месяцев назад
Short video and photo build of my Meng 1/35 Apache Longbow helicopter. I’ve designed and installed the working MFD displays, Nav, and Strobe lighting to this build. General cost info: Model Kit US$78 / Lighting Circuit and leds AU$15 / Diorama Base AU$20
Adding lights to the Meng 1/35 Apache 64-D Longbow Helicopter - Progress
Просмотров 1347 месяцев назад
I’ve designed my own circuit and have installed all the electronics within the chopper. I was going to install motors for the rotors, but the spindles were not strong enough for the heavy rotor assembly.
Australian Bush sounds on the River Murray - Dji drone
Просмотров 1258 месяцев назад
Video from the Dji drone around the banks of the River Murray after the big flood of 2022. All the inland areas that were covered with water are now covered with a lush dense green carpet of very painful prickles.
Atlas Air B747 taking off from Adelaide Airport 17Oct23
Просмотров 3799 месяцев назад
Atlas Air Boeing 747-87UF (Reg N856GT) heading for Hong Kong. Departing Adelaide Airport.
Lighting Up The Apache AH-64D 1/35 Meng Helicopter Model - Progress
Просмотров 79110 месяцев назад
A brief video on the installation of external navigation, strobe lighting as well as internal MFD lighting. This is a low cost, do-it-yourself project. Total cost to produce all the lighting in this video was around Au$12. I have had to design a bespoke circuit diagram to incorporate both strobe lighting and standard lighting onto one circuit. Strobe lighting runs off 13vdc and all other lighti...
Basic Circuit for Model Aircraft Navigation and Strobe Lighting - Progress
Просмотров 43110 месяцев назад
I wanted to make a simple Navigation / anti collision Strobe lighting circuit for my model aircraft. So here it is, very basic, and very cheap. This project came in at AU$12 or US$7 equivalent. It runs off 12.5vdc (Lithium battery). The strobe circuit requires 12vdc for the strobe ( 12 to 16vdc is fine). Strobe Frequency is adjustable via the 10k potentiometer. The voltage is then reduced to 5v...
F/A-18 Hornet - One half with Ukrainian insignia, the other half with RAAF insignia
Просмотров 22711 месяцев назад
In tribute to the proposed donation of Ex RAAF F/A-18 Hornets to the Ukrainian Defence Forces.
Ukrainian Air Force and RAAF F/A-18 HobbyBoss 1/48 Scale Model - Completed
Просмотров 35111 месяцев назад
With the possibility that the Australian government is going to 'donate' our old RAAF F/A-18 fighter aircraft to Ukraine, I thought it would be fun to build a combo version. One half Ukrainian Air Force and the other half Australian Air Force. The RAAF side would be clean and fitted with a combination of high precision guidance weapons and the Ukrainian side, a more battle hardened look with it...
Henschel Hs129 B3 Zoukei Mura 1/32 Scale Model - Tank Buster - Completed
Просмотров 3,8 тыс.Год назад
Photo Build of the Zoukei-Mura Hs129B-3 1/32 scale model kit.
Litton LTN-72 Guidance System Disassembly of Gyroscopes and Accelerometers - Inertial Navigation
Просмотров 931Год назад
Short video showing the disassembly of an LTN-72 Intertial platform assembly. Talking about issues and description of the parts that make up the guidance platform.
First start up of the Hachette Spitfire Mk 1a with modified base
Просмотров 660 тыс.Год назад
First start up of the Hachette Spitfire Mk 1a with modified base
Spitfire Mk1a Weathering Tutorial - Hachette 1/18 Scale
Просмотров 3,8 тыс.Год назад
Spitfire Mk1a Weathering Tutorial - Hachette 1/18 Scale
Hachette 1/18 Spitfire Computer Initialisation
Просмотров 1,6 тыс.2 года назад
Hachette 1/18 Spitfire Computer Initialisation
Operational 1/200 Scale Hachette Bismarck Battleship
Просмотров 3,2 тыс.2 года назад
Operational 1/200 Scale Hachette Bismarck Battleship
Initialising Deagostini R2 for the first time
Просмотров 4662 года назад
Initialising Deagostini R2 for the first time
Firing up the Hachette 1/18 scale Spitfire
Просмотров 1,5 тыс.3 года назад
Firing up the Hachette 1/18 scale Spitfire
Bismarck Pictorial Build - Hachette: Issues 1 to 90
Просмотров 1 тыс.3 года назад
Bismarck Pictorial Build - Hachette: Issues 1 to 90
Hasegawa Model Kit Catalog 1984 Hobby Kits
Просмотров 3803 года назад
Hasegawa Model Kit Catalog 1984 Hobby Kits
1981 ESCI Plastic Model Kit Catalogue
Просмотров 2753 года назад
1981 ESCI Plastic Model Kit Catalogue
It will be nice to have it in 1/35 scale
I'll admit I jump around a little watching this so maybe I missed something but why does Stella's total drop by $14 at the end of the show?
Never noticed that. All I know is that I was robbed on that show:-)
This wheel in Adelaide was the best. It seemed to roll nicely and being flat and always in shot was nicely done. They lost their minds changing it and sacking Burgo.
FUN !
Could it be possible to also use nano leds for the strobes?
Hi, could I get you're help, I'm trying to rebuild the circuit you used.. But don't get any response of the leds..
I dare you to put your finger near it... Everybody's inner-child wants to
I assembled many of those G-1200 gyros and accelerometers at Litton many years ago. When a US military tour came through, with the president and upper management of Litton, I pulled some gyros out of a heat treating oven. One of the wiring harnesses got caught, and the gyro fell. I put my foot out to break the fall, but instead punted it across the room and bounced it off the window. You could see all of the heads following it as it flew through air. I got a pretty good reprimand afterwards. Good times !
I spent 20 years working on Ltn-72s and 92s both in Australia and in London at service centres. Great job. I loved the calibration side of the job.
AWESOME. 😀👍.
Thanks 👍
One Flew Over The Cuckoo's Nest.
Cool. 😀👍.
I was once a line mechanic at a major US airline and used to change INUs. I would love to find an unserviceable one and extract the gyro to use as a desk ornament. Do you have any contacts for old gyros lying around?
Those days are long gone I’m afraid. I last worked in the workshop some 20 years ago. But the OEMs still repair gyros and still dispose of ones that are BER. I would look into Litton Systems Canada which is the company that overhaul mechanical gyroscopes. Alternative is to find one on eBay, they occasionally turn up.
@@Bespoke_ModelMaker thanks for your reply
Brilliant, well done, inspiring.
Thanks. End result was better than expected.
5435! I built that Osprey!! Like the real aircraft! 165435 was an LRIP MV-22B Osprey built at Bell's Military Aircraft Assembly Center in February -Oct/November 1999. 165435 is now a static ground training article never to fly again. 😞
It actually sat in my cupboard for a few years before I came up with the vision of adding all the gizmos to the build.
Very Impressive Prototype. Excellent!
Thanks, It was my most ambitious project yet.
Would you sell it my dad was in the raf in the war
It’s quite expensive, plus due to fragility it would have to be picked up. :-)
Would you sell it My dad was on spitfire in the war war
These are still available to buy from Hachette for around $2400
That’s amazing! All that work paid off she’s a beauty ❤
Thanks. This one has taken a lot of extra effort.
Can you tell me what base color did you use?
I did not use a base colour. I did prepurchase quite a few tamiya as-20 off white rattle cans but never used them. I went with the black oil paint rubbing option. It produces a slightly darker finish but you have the option of making it lighter with thinners. I did make a RUclips video of how to use the oil paint on the Falcon. So to sum up. Oil paint rubbed back, then tamiya weathering kits to create all the streaking. Airbrush was used only on the damage areas.
check out the first 3d printed rc Lancaster .designed by Mark Chambers at 3d Aeroworks 1300mm Prototype test flown by my self ruclips.net/video/l0tXQV1eWso/видео.html
How did you achieve the sound?
To begin with i collected lancaster sounds from various youtube videos. I then combined the audio parts i wanted into one 2 minute MP3 file. You then load that file onto a micro sd card and insert that into a mini mp3 audio playback card. These can be purchased for a couple of bucks off ebay. Power the board with 4 volts and connect up a speaker. When power is initiated the audio file will play. I’m doing the same setup for an Osprey i’m currently building. The sound module has a part number MP3-TF-16P
That's really clever. Congrats.
👍👍👍
Shouldn't the cockpit be closed while dogfighting....
I prefer the wind in my hair :-)
Not sure how I stumbled upon this video but I used to build these guidance systems. I apprenticed at Litton Systems Canada Limited from 1977-1981. 25 Cityview Drive in Rexdale Ontario.
They were my life for 25 years. The days when high quality handskills were required. Not any more…
@@Bespoke_ModelMaker Yes. Many of my mentors were watchmakers from Europe.....German and English. I left in 1984. They were building laser gyros at the time. Hard to imagine that company folded 14 years later. They had 7 buildings and 3,000 employees.
Lovely model well made 😉👏👏👏👍 But, i find just one fault ( only my own personal opinion ) That the anti collision lights (flashers) are a bit too slow in there timing. I'd rather they were a bit quicker ( about 20 to 30%% quicker) but, that's my own personal opinion But, it's really nice otherwise. & no sign of a floodlight ( night sun) Not that important just a bit of a mind boggler for me only anyway. Well made in quality 👏👍😉 I'm not trying to criticize it just my own personal opinion of which i am sure everyone is entitled to. LOVELY ALL THE SAME. 😉
Thanks for commenting. The main aim for me with this idea was just trying to design and build my own lighting circuitry. In answer to your question, I did place a potentiometer on the circuit that would change the rate (frequency) of flashing. But my problem was that all this is permanently installed within the helicopter now… so am unable to change the rate. I have started a new model (Osprey) yesterday and aim to make the blinking rate the same as the real thing, plus I also want to add spinning rotors. With regard to the floodlight on the Apache, there was no option to display it down so kept it stored and off, whereas with the Osprey, I have wired that in so that it will be operational. In the end it’s all just a bit of fun to try and make each model better. The other goal was to try and make the lighting for less than what I can buy a kit online for which is generally around $150. The Apache lighting cost me around $15 all up. :-)
@@Bespoke_ModelMaker I would like you to build a Puma helicopter in camo decor & Airwolf with working lights & weapons ( if possible ) i know i am asking quite a lot But, the puma i have flown in & was a very memorable flight. & Airwolf as you know is a famous TV aircraft. But, i will leave it up to you. I do hope you can achieve these in the near future. 😉👍.
Awesome. Is the base playing the sound fx to?
Sadly no. I made the two minute audio file from a combination of different helicopter sounds and blended in the hope that I could add a computer and also motors to the rotors to have a fully operational chopper. But the spindles on the micro motors were not strong enough to handle the large, heavy main rotor. So in the end just went with lighting.
@@Bespoke_ModelMaker no worries. Thanks for the reply.
Hi, Was all the electrics such as the motors, gears, lights etc, included in the issues, as I'm thinking of looking to see if I can get all the issues especially if it has all the electrics. I started with issue one, some years ago but I was informed that Hachette was pulling the plug on it. I feel gutted now. But hey, well done you've done a brilliant job.
Yes. Everything is included in the model. All lights, gearboxes, motors, computers. It was a very enjoyable build. 140 issues. Remember that this was the latest metal hull version. The original Hachette version was wood with no electronics.
The complete model kit is available the Agora models.
Cool
HI! Very useful video, I have a Tamiya Lanc to build, and I want to push the boat out and motorise it. I have found a Belgian company that provide a plug and play package, including motors and two wing mounted speakers - available to Magic Scale Modelling for about £100. ruclips.net/video/VO_w4FrVpOU/видео.htmlsi=9rPIgpKLGGk76UyA
3:49
Starting sequence of the 4 engines is wrong ! ...First inside starboard , then outside starboard , then inside Portside , then outside Portside !
This start up sequence is more for visual displays at model shows. I've watched a few startups on youtube and found that they do vary a bit in their start up sequence.
This is an amazing converstion and would make a great public diorama, especially for children of all ages who might like to press the start button repeatedly. By the way the Albion AM463 refueller looks good but sorry to say was not used with the Lancaster as its pipework and hoses were designed to refuel three Hawker Hart type biplanes. Look for an AEC 854/0854 6x6 Refueler in the same scale, if they do one as that had the fuel capacity of 2,500 Gallons suitable for a Lanc on a long trip.
This was a learning phase for me, just to see whether I could install electronics and lighting into a 50 year old kit. Yes, there's lots of issues - Props spinning backwards and the lights are too bright, but it was just a bit of fun. With each build I try to improve the quality of the lighting and do it cheaper. I just finished an Apache helicopter today, video will be up shortly.
Hi, I really love this video and the model you made. Are there any details on the electronics you used? I've been working on a JU88 with blinking leds as 'combustion fire' from the engines (Arduino). However I got no clue how to get the flaps working. Keep up the good work!
Hi, This was a parts build kit from Deagostini. The kit was very complicated and bespoke and very prone to failures. I've gone back to using just the basic electronics to install lights/strobes etc. I'm keeping away from moving parts. ;-)
Sorry - meant to say Hachette is the producer of this kit, not Deagostini.
We had the same series on mitsubishi zero in Japan. this one looks cool too!
The end result is good. But the build process for the spitfire had quite a few engineering issues. A lot of people gave up. This one’s requires the extra effort, but rewards the builder in the end.
Ssesprit. professional drone, till next time.
Just the cheaply mini 3 pro. Such a good drone for the price.
Very impressive Im just about to start a 48 scale tamiya Lancaster. Started building christamas last yr and sold my first built kit last month and was surprised what it sold for...... Have to say though i wont be selling anymore as i was gutted after all thw work id put in 🤔
Yes, the time spent making larger scale models - you never get back. It’s always personal. Maybe if they paid us a million bucks it might sway us. :-) Good luck with the build.
Went to Indonesia
Long live the Queen Of The Skies😇
if I want only display what issue I have to buy ?
Not possible. They disperse the base parts into the build, so you have to get all the parts to finish the plane.
@@Bespoke_ModelMaker Oh. Ok I see. I so sad.
I'm 17, this is the same perspective I have but I mostly see 777s. I would do anything to get to see the Concorde fly over
These look nice but the price tag is stupendous, why do they make things then put a totally unrealistic price on them, if it was a reasonable price they would sell more and make more but I can by a real flying one for half the price and get fresh air in the bargain lol 😂😂is
Yes,the price for these kits is very high. Only dedicated model builders with plenty of excess cash will build kits like this. I believe they price this in. Low build numbers - high price.
I am building this too 😁
I hope you’re enjoying the build. The end result is very impressive.
7 days and no comments? HOBBY Boss must have money to burn on a speculation kit. This hasn't happened and most likely won't. Its a ridiculous transaction in real life promoting more tension to the conflict because of the conversion time, pilots logistics etc. If you want to build the kit use one currently available. Hobby Boss has got a huge list of models and quality to offer over " phantom" kits. Hobby stores will be sending their orders back for meltdowns.
the ukrainian air force never had f18 the Ukrainians are neo nazi banderas who losing the american proxy war against russia
14:42-14:47 Card Fight Vanguard Girs Crisis BANKRUPT the Bankrupt gotcha I got you lost Chris Quanton I’m sorry
11:40-11:45 Inazuma Eleven Go: Galaxy oh my goodness!!! BANKRUPT I’m so sorry Yuma Tsukumo
5:00-5:06 Future Card BuddyFight Ace BANKRUPT I’m so sorry Aiger Akabane to battle your time!!!
Their prizes looks like an op shop
It was like the magic cave back in 1993. :-)
Hello from Greece. Can you tell me where i can found the box with the sailor's those you put on the ship ?
The box actually came with the sailors in it. Bought the sailors off eBay. Just search for 1/200 sailors.
We’ll done!! Looks amazing great finish
Very well engineered model kit which was a pleasure to build. :-)